Diamond plates

Decorative finish diamond pad

Resin pads to move from preparation grinding to a polished bright concrete floor.

The decorative diamond pad is the par excellence finishing tool for polished concrete floors, wax concretes and decorative interior surfaces. Where metal plates open and prepare the substrate, resin pads progressively refine the material until a mirror brightness is achieved. Sept Tools offers a complete range of grits 50 to 3000 to follow a consistent polishing sequence, from intermediate abrasion to final gloss. These consumables are essential for high-end decorative concrete sites.

Technical specifications

Specifications and manufacturing

Pads in resin loaded with diamond crystals. Available grits 50, 100, 200, 400, 800, 1500 and 3000. Standard Velcro fastening for fast mounting. Dry or wet work depending on the desired finish. Compatible with Sept Tools grinders fitted with a suitable base plate. Typical life span of 200 to 600 m² per pad depending on pressure and substrate.

Compatibility

Compatible Sept Tools machines

Use cases

For which job sites?

Polished bright concrete

Complete polishing sequence to reach a mirror finish on interior slabs.

Wax concrete

Final gloss work on decorative wax concrete in residential or tertiary projects.

Commercial floors

Aesthetic finishing for shops, hotels and reception spaces.

Luxury renovation

Refurbishment and gloss restoration of vintage concrete floors in interior projects.

Why Sept Tools

The choice of a French manufacturer

Complete range

All grits available for a fully controlled polishing sequence.

Controlled finish

Pads selected for cutting stability at every grit step.

Trade advice

Our team helps you structure your sequence by target finish.

Availability

Stock in Roanne to meet decorative job site demands.

Frequently asked questions

Your questions, answered

Which grit sequence for a polished floor?

Typically 50, 100, 200, 400, 800 then 1500. For a mirror finish, end with 3000. A lithium hardening step can be inserted in between.

Dry or wet work?

Dry on occupied sites with extraction, wet to optimise the final brightness. Wet work slightly extends pad life.

Compatible with a lithium hardener?

Yes, and even recommended between 200 and 400 grit to densify the substrate and improve final brightness.

How many m² per pad?

200 to 600 m² depending on grit, pressure and dry or wet usage. Fine grits (1500, 3000) generally last longer than first grits.

Besoin d'un devis ou d'une démonstration ?

Notre équipe commerciale vous accompagne dans le choix de vos outils professionnels.

Contactez-nous