COMPLETE SET

Gazelle ceiling sanding set

The complète solution for effortless ceiling sanding.

Ref. ENS103554

+3,000 job sites | Since 2018 | Quote within 24h
Gazelle ceiling sanding set: Gazelle Premium trolley, Fouine XB165 sander and IU33 Longopac vacuum

Traditional method

  • Brushed grinder 90 dB, hearing protection mandatory
  • Vibrations > 5 m/s2, MSD after 2h
  • Monthly brush replacement
  • Uncaptured dust, FFP3 mask saturated

With Sept Tools

  • Brushless 60 dB, work on occupied sites
  • Vibrations 0.35 m/s2, full day without pain
  • Zero motor maintenance, 4,000 to 6,000 h lifespan
  • Longopac sealed aspiration, zero silica contact
PERFORMANCE

Key figures

60 dB

Work without hearing protection, even on occupied sites.

4 m

Maximum working height without scaffolding.

0 bags

Longopac system: continuous sealed bagging, zero dust contact.

Ceiling sanding is the most demanding task in construction: arms overhead for hours, constant dust, deafening noise. The Gazelle set eliminates all three constraints. The Gazelle Premium cart supports the Fouine XB165 sander and presses it against the ceiling using a pneumatic ram. The operator guides the movement without bearing the machine weight. The IU33 Longopac vacuum captures dust at source with its continuous bagging system: no bag to empty, no contact with silica dust. Result: 4 to 6 hour sessions instead of 90 minutes, consistent finish on large surfaces, and a quiet 60 dB jobsite.

Use cases

  • Ceiling sanding in commercial rénovation
  • Joint compound smoothing in new residential
  • Surface préparation before ceiling paint
  • Ceiling rénovation on occupied sites (hotels, offices)
Configure your Gazelle ceiling sanding set in 2 minutes
Download the technical sheet

The only French manufacturer of professional brushless tools

ROI

Your estimated ROI

Real example: 500 m² plafond beton job site

Traditional method

Duration

33 h × 2 operator(s) = 66 h

Noise

90 dB

Vibrations

5 m/s² (TMS garantis)

Sept Tools

With the Gazelle ceiling sanding set

Duration

20 h × 1 operator(s) = 20 h

Noise

60 dB

Vibrations

0,35 m/s²

Savings : 46 operator hours per job site

≈ 1 840 € saved

Set payback: ~3 a 5 typical job sites

Based on: loaded operator rate 40 €/h, rendement beton standard 12-16 m²/h poncage plafond (ENS103554). Your case may vary.

Frequently asked questions

What is the maximum working height?

The Gazelle cart reaches 4 m. For greater heights, it can be used on a scissor lift.

Is the vacuum included?

Yes. The IU33 Longopac is included in reference ENS103554. It is a class H vacuum with HEPA H13 filtration and continuous sealed bagging.

How many m2 per hour?

Between 15 and 30 m2/h depending on material and desired finish. The gain versus manual sanding is a factor of 2 to 3.
04 77 60 60 74 Request a quote