Skip to content

Getting started with your Sept Tools machine

Potam wall sander by Sept Tools

Register your warranty and receive our maintenance advice to get the most from your brushless tool, job after job.

Get off to a good start

Your first steps

1

Unbox and inspect

Empty the box on a stable surface and check the machine, backing pad and accessories against the delivery note. Transport damage shows straight away: a cracked housing, a pinched cable, a warped pad. If anything looks wrong, do not plug it in and get in touch with us.

2

Handling and PPE

Read the manual before the first start and gear up: dust mask, hearing protection, goggles and suitable gloves. Our machines run quiet (sound level stated in the manual of each machine that declares it, for example 60 dB(A) for the Fouine XB165) and connect to a class H vacuum to capture dust at source, but PPE remains essential on site, in addition to capturing dust at the source.

3

The right consumable

The wrong pad or disc wears the machine down and slows the job. Pick the reference matched to your substrate (concrete, screed, resin, wood) and to the finish you want. Our selection guide points you to it in a few clicks.

Find the right consumable
4

Routine maintenance

The brushless motor lasts up to 20,000 hours (motor only) when it is looked after. Empty the filter and bag after every dusty job and keep the air vents clear. Our Roanne workshop repairs and supplies parts.

See after-sales service
24-month warranty

Register my warranty

A few details are enough. You will then receive our maintenance advice to extend the life of your machine.

You deal directly with the Roanne factory.

04 77 60 60 74 Request a quote