Brushless range made in France: 7 to 90 m²/h depending on configuration

Professional brushless tools designed and manufactured in France for the demands of construction.

43 products shown

Ceiling Planer Planing View product

Ceiling Planer

The CEILING PLANER SET has been developed with our brushless motors (low noise, low vibration, extended service life and waterproof) for renovation, construction, demolition, asbestos removal and dismantling. It handles your planing tasks on ceilings in render, resin, bituminous coatings and more. This planer can remove up to 13 mm of material in a single pass. This machine must be used with an IP65 electronic speed controller and a dust extractor
Chipping Hammer DUSS P26C Miscellaneous View product

Chipping Hammer DUSS P26C

DUSS P26C electric chipping hammer, SDS Min chuck. For wall chipping work on render and plaster.
Chipping Hammer DUSS PKX7 Miscellaneous View product

Chipping Hammer DUSS PKX7

DUSS PKX7 1500 W electric chipping hammer, SDS Max chuck. For wall and ceiling chipping on concrete, stone and render.
Drilling Trolley Drilling View product

Drilling Trolley

Professional drilling trolley for the positioning and stabilisation of drilling rigs.
Ecureuil Planing View product

Ecureuil

The Ecureuil has been developed with our 700W brushless motors (low noise, low vibration, extended service life and waterproof) for renovation, construction, demolition, asbestos removal and coating stripping. Compact and manoeuvrable, it accesses hard-to-reach areas.
Eland Board Lifter Ergonomics View product

Eland Board Lifter

The ELAND BOARD LIFTER is a multi-function trolley fitted with a board-lifting module that allows you to raise boards to the ceiling or wall without effort and without musculoskeletal
Eland Ceiling Drilling Ergonomics View product

Eland Ceiling Drilling

The DRILLING TROLLEY is a multi-function trolley that can be fitted with 2 different modules for ceiling drilling.
Eland Grinding Arm Ergonomics View product

Eland Grinding Arm

The ELAND GRINDING ARM is a ceiling grinding trolley fitted with a grinding arm module to support the FOUINE or FOUINETTE grinder.
Eland Load Balancer Ergonomics View product

Eland Load Balancer

The ELAND LOAD BALANCER is a trolley with a jib module fitted with a load balancer for wall work.
Eland Tube Lifter Ergonomics View product

Eland Tube Lifter

The ELAND TUBE LIFTER is a trolley designed to carry and raise tubes for ceiling installation using a rack-and-pinion handle.
Essential Mixer Miscellaneous View product

Essential Mixer

The ESSENTIAL MIXER is fitted with a universal motor for mixing and transporting a wide range of construction materials such as levelling compounds, polished concrete, printed concrete, terrazzo, self-levelling resin, resin floor screed, adhesive mortar, thermal insulation mortar and other mortars. The 90 L drum is made of fibreglass with a non-stick coating.
Exosquelette Scourpio View product

Exosquelette Scourpio

Scourpio is our passive exoskeleton for ceiling grinding and all overhead work (drilling, painting, plastering, asbestos abatement). 4.6 kg, no battery, no motor, mechanical springs. Relieves the rotator cuff and trapezius, the main MSD driver in construction. Donned in under 1 minute, compatible with standard PPE. Designed for long sessions in full PPE (SS3/SS4 asbestos). Roanne.
Fouine Bush Hammer Bush hammering View product

Fouine Bush Hammer

The FOUINE BUSH HAMMER has been developed with our brushless motors (low noise, low vibration, extended service life and waterproof) for renovation, construction, demolition, asbestos removal and dismantling. It handles your bush hammering tasks on render, resin, bituminous coatings and more. This bush hammer is compatible with our range of ergonomic trolleys, enabling overhead bush hammering without effort. This machine must be used with an electronic speed controller
Fouine XB165 View product

Fouine XB165

The Fouine XB165 is our versatile wall and ceiling grinder, designed for renovation, construction, demolition, asbestos abatement and dismantling. Brushless 1600 W constant-torque motor, 0.35 m/s² vibration, 60 dB(A), IP65. Mounted on a Gazelle Premium or Eland trolley, it grinds concrete ceilings without holding the machine overhead. Ø165 disc for grinding, swappable bush-hammering drum in under 2 minutes. Designed in Roanne, parts in stock, national 48h after-sales.
Gazelle Drilling Rig Drilling View product

Gazelle Drilling Rig

The GAZELLE DRILLING RIG is a trolley for drilling floors, walls and ceilings in a variety of materials. This trolley features a bracket to accommodate a dust extractor, providing a complete
Gazelle Perimeter Ergonomics View product

Gazelle Perimeter

The GAZELLE PERIMETER DRILLING RIG is a perimeter drilling trolley designed for overhead work with precision and comfort. Fitted with a telescopic mast, a drill holder and a mounted drill, this trolley enables angled drilling up to 30 degrees on each side, facilitating perimeter and angled perforations. The trolley folds and unfolds easily, ensuring convenient transport and rapid set-up
Gazelle Premium View product

Gazelle Premium

The Gazelle Premium trolley carries the Fouine XB165 (or other compatible machine) for strain-free ceiling grinding. 36.2 kg, working height up to 3.80 m, non-marking wheels. Single-operator throughput 7 to 12 m²/h on concrete, x4 vs manual pole. Compatible with class H vacuums IU33 Longopac and IU40-200. Built in Roanne, European delivery within 5 to 10 working days.
Gazellomur View product

Gazellomur

The Gazellomur (grinding configuration) is our brushless 3-in-1 combo on gantry: grinding, bush hammering and planing with one machine. In grinding: 60 to 90 m²/h on concrete, 30 to 50 on plaster and adhesives, 20 to 40 on bitumen and resins. 1600 W constant torque, IP65, native ergonomics (the gantry carries the machine, the operator guides). Compatible with Sept Tools class H vacuums. Built and assembled in France.
Gazellomur Bush Hammer Bush hammering View product

Gazellomur Bush Hammer

The GAZELLOMUR BUSH HAMMER is a semi-automatic bush hammer that allows you to treat walls without any effort, primarily used in demolition, asbestos removal and dismantling. Its brushless motor delivers a machine with low noise, low vibration and an extended service life, while being waterproof (IP65). The central mast folds and unfolds without dismantling to facilitate transport and accessibility. This machine must be used with a
Gazellomur Planer Planing View product

Gazellomur Planer

The GAZELLOMUR PLANER is a semi-automatic planer that allows you to plane walls without any effort, primarily used in demolition, asbestos removal and dismantling. Its brushless motor delivers a machine with low noise, low vibration and an extended service life, while being waterproof (IP65). This machine can remove up to 1.3 mm depth on plaster and 0.8 mm on concrete in
Gecko View product

Gecko

The Gecko balancer mechanically offsets the weight of the wall grinder (Petit Potam, Fouine, Gazellomur) across all positions. 12.3 kg, generous vertical and lateral travel, no battery. The operator guides the machine without bearing the load, dividing RULA-measured fatigue by 5 across 200 m² of walls. Compatible with the Mygale gantry and Eland trolley. Roanne, 48h after-sales.
IU200 Vacuum cleaners View product

IU200

The IU200 is a patented industrial dust extractor with automatic filter cleaning and a multi-filter system. Designed for continuous 24/7 operation with no maintenance, it offers exceptional durability. Industrial extraction of fine dust for a clean and safe working environment. Equipped with 5 ULPA+PTFE cartridges (100,000 cm2), a turbine delivering 1,100 m3/h and a large-capacity drum. Compatible with the Petit Potam, Fouine and Castor.
IU33 Longopac View product

IU33 Longopac

The IU33 Longopac is our class H construction vacuum for HEPA H13 source capture. 1100 W, 25 kg, 65 l/s flow. Longopac bagging system: continuous sealed bag, emptying without reopening, eliminating dust release on disposal. Compatible with all our grinders, planers, wall chasers and core drills. Compliant with the crystalline-silica OEL of 0.1 mg/m³ (anticipating 0.05 mg/m³ in 2027). EN 60335-2-69 annex AA. Roanne, 48h after-sales.
IU40 Vacuum cleaners View product

IU40

The IU40 is a universal bypass motor cyclonic dust extractor designed for fine dust extraction on site. Its compact design facilitates transport and provides stable manoeuvrability. Equipped with a 22 m Longopac system, a ULPA+PTFE cartridge filter (18,500 cm2 filtration area) and an airflow of 340 m3/h, it is the ideal extraction solution for the Petit Potam and Fouine grinders.
IU51 Vacuum cleaners View product

IU51

The IU51 is a dual universal bypass motor cyclonic dust extractor. Extremely compact for easy transport and excellent handling, it is ideal for confined spaces. Its patented automatic filter cleaning system guarantees continuous maximum efficiency. Equipped with 2 ULPA+PTFE cartridges (22,000 cm2), an airflow of 340 m3/h and the 22 m Longopac system. Compatible with the Petit Potam, Fouine and Castor.
IU81 Vacuum cleaners View product

IU81

The IU81 is a triple-motor cyclonic dust extractor, the market reference in terms of durability. Its enhanced filter protection against abrasive materials and improved cyclonic effect make it the high-performance solution for demanding sites. Automatic filter cleaning (also available in manual mode). Equipped with 3 ULPA+PTFE cartridges (36,000 cm2), an airflow of 510 m3/h and the 22 m Longopac system. Compatible with the Petit Potam, Fouine and Castor.
MEWP Platform Support Ergonomics View product

MEWP Platform Support

The MEWP PLATFORM SUPPORT is a gantry frame with a load balancer for all types of wall work, from grinding to drilling. This frame is compatible with all our handheld machines and can be fitted with load compensators ranging from 3 to 40 kg to minimise operator strain during extended use.
Multi-Spindle Drill Drilling View product

Multi-Spindle Drill

Multi-spindle drilling rig for multiple simultaneous perforations. Significant productivity gains.
Mygale View product

Mygale

The Mygale gantry carries the grinder for wall and ceiling work, taking the load off the operator's arms. 31 kg, stable H frame, adjustable height. Compatible with Petit Potam, Fouine XB165, Gazellomur. RULA measurements: muscular load divided by 5 across 200 m² of walls vs manual grinding. Pairs with the Gecko balancer and Eland trolley for larger surfaces. Roanne, 48h after-sales.
Overhead Chipping Hammer Planing View product

Overhead Chipping Hammer

Chipping hammer specifically designed for overhead work at height.
Perc Height Drilling View product

Perc Height

The PERC'HEIGHT TROLLEY is a drilling trolley comprising our Eland trolley and a support module for mounting a rotary hammer drill. It enables holes to be drilled in ceilings up to
Perimeter Drill Drilling View product

Perimeter Drill

Perimeter drilling rig for large-diameter core drilling in walls, floors and ceilings.
Petit Potam View product

Petit Potam

The Petit Potam XM165 is our compact concrete wall grinder for surface preparation, paint removal, raw concrete grinding, plaster, adhesives and resins. Brushless 1600 W constant-torque motor, vibration measured at 0.35 m/s² (14 times below the 5 m/s² ELV threshold), 60 dB on occupied job sites. Compatible with our Mygale gantries, Gecko balancers and Eland trolleys for ergonomic work on large surfaces. IP65 sealing, x14 motor lifespan vs brushed designs. Built and assembled in France.
Pic Epeiche View product

Pic Epeiche

The Pic Épeiche is our portable brushless diamond core drill for concrete and reinforced-concrete wall drilling, perimeter drilling, chemical anchoring. 1600 W constant-torque motor, 5.9 kg, 61 dB, vibration 0.35 m/s², IP65. Dry or wet drilling depending on the diamond core bit. Compatible with class H vacuums for source capture. Parts in stock in Roanne, national 48h after-sales. No overheating, no torque loss under load.
Pic Epeiche on base Drilling View product

Pic Epeiche on base

Diamond core drill on base for vertical and horizontal core drilling. Maximum stability.
Potam Bush Hammer Bush hammering View product

Potam Bush Hammer

The POTAM BUSH HAMMER has been developed with our brushless motors (low noise, low vibration, extended service life and waterproof) for renovation, construction, demolition, asbestos removal and dismantling. It handles your bush hammering tasks on render, resin, bituminous coatings and more. This bush hammer is compatible with various ergonomic tools from our range, enabling wall bush hammering without effort. This machine must be used with an electronic speed controller
Premium Mixer Miscellaneous View product

Premium Mixer

The PREMIUM MIXER is fitted with a premium motor for mixing and transporting a wide range of construction materials such as levelling compounds, polished concrete, printed concrete, terrazzo, self-levelling resin, resin floor screed, adhesive mortar, thermal insulation mortar and other mortars. The 90 L drum is made of fibreglass with a non-stick coating. This set includes a mixing station, two pouring trolleys and a speed controller
RU80 View product

RU80

The RU80 is our versatile construction vacuum for floor grinding, workshop use, concrete dust pickup and fine debris. 1200 W, 29.6 kg, large-volume tank. Washable filter, quick emptying. Compatible with the Tapir floor grinder and standard Sept Tools accessories. Cost-effective solution for companies with mixed equipment fleets. Roanne, 48h after-sales.
Rabot Castor View product

Rabot Castor

The Castor is our hand-held concrete planer for heavy stripping, laitance removal, rough profile before resin or refurbishment. Brushless 1600 W constant-torque motor, 14 kg, 59 dB, vibration 0.35 m/s², IP65. Constant force under load with no speed drop. Compatible with Sept Tools class H vacuums. Swappable drum for aggressive grit. Parts in stock in Roanne, national 48h after-sales.
Rainureuse Desman View product

Rainureuse Desman

The Desman RAI102822 is our brushless diamond wall chaser for wall and floor grooves on concrete, porcelain tile, asphalt and stone. 1600 W constant-torque motor, 10.6 kg, 59 dB, vibration 0.38 m/s², IP65. Measured throughput: concrete 8 to 12 m/h, porcelain 10 to 15 m/h, asphalt 6 to 10 m/h, stone 5 to 8 m/h. Compatible with Sept Tools class H vacuums for source capture. Articulated arm absorbs the weight. Roanne, 48h after-sales.
Rainureuse Taupe View product

Rainureuse Taupe

The Taupe is our compact brushless diamond wall chaser for electrical and plumbing grooves on concrete, brick and concrete-block walls. 1600 W constant-torque motor, 10.6 kg, 59 dB, vibration 0.38 m/s², IP65. Adjustable depth and width, HEPA source capture via class H vacuum. Designed for fast electrician and plumber installs without damaging the substrate. Roanne, 48h after-sales.
Tapir View product

Tapir

The Tapir XTT330 is our professional concrete floor grinder for screed preparation, industrial surfacing and polished concrete finishing. Brushless 1600 W constant-torque motor, 49 kg, 60 dB, vibration 0.27 m/s², IP65. Throughput 19 to 26 m²/h on concrete depending on hardness. Compatible with our class H vacuums IU33 Longopac, IU40, IU51, IU81 for crystalline silica OEL compliance. No sparking, no overheating, x14 motor lifespan vs brushed designs. Parts in stock in Roanne, 48h after-sales.
Turbo7 View product

Turbo7

The Turbo7 is our compact construction vacuum for quick interventions: wall grinding, grooving, drilling. 1600 W, 9.3 kg, easy transport on stairs and floors. Class H filtration compatible, source capture via standard 50 mm hose. Ideal for apartment renovation, offices and sensitive sites where the IU33 Longopac is too bulky. Roanne, 48h after-sales.
Buying guide

Compare the machines

Put two or three machines side by side and compare their verified technical specs.

Power (W)
Weight (kg)
Vibration (m/s²)
Noise level (dB)
Speed (rpm)
Ingress protection
Plate (mm)

Ready to switch to brushless?

Request a free quote or book a demo on your job site.

Contact us

Devis gratuit et sans engagement, réponse sous 24 h. Matériel garanti 24 mois.

04 77 60 60 74 Request a quote