SIGNATURE MACHINE

Desman Groover

Clean and quiet grooves for your conduit routing.

Ref. RAI102822

+3,000 job sites | Since 2018 | Quote within 24h

Sept Tools Desman Groover: handheld brushless diamond groover for floor and wall

Traditional method

✗ Brushed chaser 90 dB, jobsite shut down on occupied sites
✗ Concrete chips, rework needed
✗ Monthly servicing, brushes to replace

With Sept Tools

✓ 60 dB, chasing in occupied housing without disturbance
✓ Clean calibrated grooves, zero rework
✓ Zero motor maintenance, x14+ lifespan

PERFORMANCE

Key figures

60 dB

Work in occupied housing without noise disturbance.

40 mm

Groove depth adjustable up to 40 mm.

2 discs

Simultaneous cutting for calibrated grooves.

Wall chasing for electrical conduits is a constant source of noise, dust and concrete chips. Standard brushed chasers vibrate excessively and wear out quickly. The Desman is a brushless diamond wall chaser that cuts concrete without chipping. Its 2 simultaneous discs create clean, calibrated grooves with adjustable depth up to 40 mm. At 60 dB, it enables chasing in occupied housing without freezing the jobsite. Compatible with Mygale and Gecko anti-fatigue systems for long sessions.

Use cases

▸ Electricians in rénovation
▸ Electrical conduit routing in walls and floors
▸ Chasing on occupied sites (housing, offices)
▸ Grooves for embedded plumbing

Configure your Desman Groover in 2 minutes
Download the technical sheet

The only French manufacturer of professional brushless tools

ROI

Your estimated ROI

Real example: 200 ml rainurage mur béton job site

Traditional method

Duration

16 h × 1 operator(s) = 16 h

Noise

95 dB

Vibrations

6 m/s²

Sept Tools

With the Desman Groover

Duration

10 h × 1 operator(s) = 10 h

Noise

60 dB

Vibrations

0,35 m/s²

Savings : 6 operator hours per job site

≈ 240 € saved

Set payback: ~4 à 6 typical job sites

Based on: loaded operator rate 40 €/h, rendement béton standard 8-12 ml/h rainurage (RAI102822). Your case may vary.

Request a custom ROI calculation

Frequently asked questions

What is the maximum groove depth?

40 mm. Depth is adjustable from 0 to 40 mm in increments.

How many discs work simultaneously?

2 diamond discs work simultaneously to create a calibrated groove. Spacing is adjustable to match conduit diameter.

Is the Desman compatible with anti-fatigue systems?

Yes. It mounts on Mygale and Gecko frames for long chasing sessions, removing the load from the arms.

Related sets

Gazelle ceiling grinding set: Gazelle Premium trolley, Fouine XB165 grinder and IU33 Longopac vacuum

Gazelle ceiling grinding set

Gazelle Premium ergonomic trolley, Fouine XB165 grinder and IU33 Longopac cyclonic vacuum. Up to 4 meters height, effortless.

Ref. ENS103554

Eland ceiling grinding set: Eland Premium trolley, grinding arm and Fouine XB165 grinder

Eland ceiling grinding set

Compact and mobile Eland Premium trolley with grinding arm and Fouine XB165. Ceiling grinding up to 3.80 m effortlessly.

Ref. ENS103152

Mygale wall grinding set: Mygale gantry with load balancer and Potam XM165 grinder

Mygale wall grinding set

Mygale gantry with 8-10 kg load balancer and Potam XM165 grinder. Wall grinding up to 2.30 m without operator fatigue.

Ref. ENS103155

04 77 60 60 74 Request a quote