Full overhead arm MSDs
Le problème
Manual ceiling planing: shoulders out of action within 1 hour.
Sept Tools
Trolley absorbs the weight: zero felt load, full day workable.
Sept Tools
Dedicated ENS103337 ceiling planing when manual no longer suffices
Dedicated ENS103337 machine for ceiling planing. When manual methods no longer suffice: built-in strain relief, class H extraction, constant brushless torque.
Free quote, no obligation, reply within one working day. Equipment guaranteed 24 months.
Ceiling planing is the most demanding step of mechanical stripping. Arms permanently raised, the weight of the machine to bear, chips and fines that fall back straight onto the operator: manual methods quickly hit their physical and regulatory limits. When manual no longer suffices, Sept Tools offers a dedicated machine: the Rabot Plafond ENS103337. A brushless machine designed specifically for ceilings, with built-in strain relief, class H extraction and a force-led attack setup. No multi-purpose compromise: one machine, one use, maximum efficiency on degraded ceiling substrates.
Our solutions
View all our products Which machine for your job site?
The machines below are selected for this application: brushless motors, dust captured at the source (class H extraction) and anti-MSD design. Quote within one working day.
View product Rabot Plafond
The CEILING PLANER SET has been developed with our brushless motors (low noise, low vibration, extended service life and waterproof) for renovation, construction, demolition, asbestos removal and dismantling. It handles your planing tasks on ceilings in render, resin, bituminous coatings and more. This planer can remove up to 13 mm of material in a single pass. This machine must be used with an IP65 electronic speed controller and a dust extractor
View product IU33 Longopac
The IU33 Longopac is our class H construction vacuum for HEPA H13 source capture. 1100 W, 25 kg, 65 l/s flow. Longopac bagging system: continuous sealed bag, emptying without reopening, eliminating dust release on disposal. Compatible with all our grinders, planers, wall chasers and core drills. Compliant with the crystalline-silica OEL of 0.1 mg/m³ (anticipating 0.05 mg/m³ in 2027). EN 60335-2-69 annex AA. Roanne, 48h after-sales.
View product IU40
The IU40 is a universal bypass motor cyclonic dust extractor designed for fine dust extraction on site. Its compact design facilitates transport and provides stable manoeuvrability. Equipped with a 22 m Longopac system, a ULPA+PTFE cartridge filter (18,500 cm2 filtration area) and an airflow of 340 m3/h, it is the ideal extraction solution for the Petit Potam and Fouine grinders.
View product IU51
The IU51 is a dual universal bypass motor cyclonic dust extractor. Extremely compact for easy transport and excellent handling, it is ideal for confined spaces. Its patented automatic filter cleaning system guarantees continuous maximum efficiency. Equipped with 2 ULPA+PTFE cartridges (22,000 cm2), an airflow of 340 m3/h and the 22 m Longopac system. Compatible with the Petit Potam, Fouine and Castor.
View product IU81
The IU81 is a triple-motor cyclonic dust extractor, the market reference in terms of durability. Its enhanced filter protection against abrasive materials and improved cyclonic effect make it the high-performance solution for demanding sites. Automatic filter cleaning (also available in manual mode). Equipped with 3 ULPA+PTFE cartridges (36,000 cm2), an airflow of 510 m3/h and the 22 m Longopac system. Compatible with the Petit Potam, Fouine and Castor.
View product IU200
The IU200 is a patented industrial dust extractor with automatic filter cleaning and a multi-filter system. Designed for continuous 24/7 operation with no maintenance, it offers exceptional durability. Industrial extraction of fine dust for a clean and safe working environment. Equipped with 5 ULPA+PTFE cartridges (100,000 cm2), a turbine delivering 1,100 m3/h and a large-capacity drum. Compatible with the Petit Potam, Fouine and Castor.
Measured performance
60 dB(A)
Sound level
Occupied site without acoustic nuisance.
0.35m/s²
Vibration
Grip measurement, ceiling planing cycle.
H
Extraction class
IU33 Longopac HEPA H13 integrated.
x14+
Brushless lifespan
Constant torque, ceiling force maintained.
Traditional method vs Sept Tools
×
Manual ceiling planing
- Raised arms: 1 hour max before acute MSD
- 2-3 m²/h max before extreme fatigue
- Class M vacuum: ceiling OEL not met
- Cumulative substrate: uneven manual stripping
- Fines fall back directly onto the operator
✓
Sept Tools Rabot Plafond ENS103337
- Trolley absorbs the weight: full day without pain
- Sustained throughput, constant brushless force
- IU33 Longopac HEPA H13: OEL upheld
- Constant torque: uniform stripping
- Source capture: exposure divided by 50
Why Sept Tools
Why choose French brushless tools?
Dedicated constant-torque brushless
Constant torque against the ceiling effort, maintained under load.
Dedicated machine, no compromise
Architecture optimised for ceilings, no multi-purpose combo.
Integrated class H extraction
IU33 Longopac HEPA H13 compliant with crystalline silica OEL.
Native trolley strain relief
Weight fully absorbed, a full day without fatigue.
Our ceiling planing method
1
Ceiling diagnosis
Layer thickness, ceiling height, reinforced substrate.
2
Depth setting
Cut depth set to the thickness of the coating to remove.
3
Brushless planing
Constant force, trolley absorbs the weight, steady feed.
4
Source extraction
IU33 Longopac HEPA H13: chips and fines captured.
5
Substrate check
Healthy concrete verified, surface ready for finishing.
- 1
Ceiling diagnosis
Layer thickness, ceiling height, reinforced substrate.
- 2
Depth setting
Cut depth set to the thickness of the coating to remove.
- 3
Brushless planing
Constant force, trolley absorbs the weight, steady feed.
- 4
Source extraction
IU33 Longopac HEPA H13: chips and fines captured.
- 5
Substrate check
Healthy concrete verified, surface ready for finishing.
Challenges and solutions
Which challenges, and how to solve them?
Uneven degraded substrate
Le problème
Cumulative uneven paint layers: hard to attack manually.
Sept Tools
Constant brushless torque + maintained force: uniform stripping.
Falling silica compliance
Le problème
Ceiling fines fall back onto the operator: direct exposure.
Sept Tools
IU33 Longopac HEPA H13: source capture, exposure divided by 50.
Force versus speed choice
Le problème
Fast feed at the ceiling: zero depth, drum worn out.
Sept Tools
Constant force-led setup: maximum depth per pass.
Force-led throughput
Le problème
Manual: 2 to 3 m²/h max before extreme fatigue.
Sept Tools
Dedicated brushless machine: sustained throughput without fatigue.
Dedicated machine payback
Le problème
Specialised machine: occasional use means long payback.
Sept Tools
Façade contractors and tertiary stripping: 8-14 month payback.
Use cases
For which job sites?
Tertiary renovation ceiling paints
Removal of aged industrial or intumescent paints in offices and technical rooms. Rabot Plafond: 8 to 15 m² per shift on thick cumulative layers.
Suspended ceiling adhesive office strip
Removal of adhesive residues left by acoustic tiles in office and hotel renovation. Mechanical alternative to chemical strippers, 10 to 20 m² per shift.
Architectural exposed concrete ceiling
Stripping of soffit coatings for bare-concrete finish in lofts, hospitality and cultural spaces. Clean reveal, 6 to 12 m² per shift.
Covered car park resin preparation
CSP 5-7 mechanical profile for anti-condensation resin keying. Covered car parks and damp technical rooms: superior durability vs simple grinding.
Real-world conditions
Large surface ceiling decontamination
decontamination · concrete ceiling
Planers: watch all our jobsite videos Frequently asked questions
Your questions, answered
Why a dedicated machine for ceiling planing?
Ceiling planing combines the strain of overhead work with the strain of force planing. A dedicated machine allows an architecture optimised exclusively for this use case: trolley absorbing the weight, integrated extraction, raised-arm ergonomics. A multi-purpose combo would not reach the same level of efficiency.
When to switch from manual to the Rabot Plafond?
As soon as the job exceeds 30 to 50 m² or the frequency of operations becomes recurrent. Manual ceiling planing is sustainable on a one-off basis but becomes physically destructive beyond. The dedicated machine pays back quickly across façade contractor fleets or tertiary stripping companies.
Which extraction for ceiling silica compliance?
The IU33 Longopac class H HEPA H13 is the standard reference connected to the Rabot Plafond ENS103337. It complies with the French OEL of 0.1 mg/m³ for alpha-quartz crystalline silica. Source capture is critical at the ceiling because the fines fall back directly onto the operator.
Does the planer damage the concrete substrate?
No, provided the cut depth is set to the thickness of the coating to remove. Sept Tools provides the setting procedure. The drum stops on healthy concrete without attacking the substrate.
Payback period for a façade contractor?
For a façade contractor or tertiary stripping company carrying out regular ceiling planing, payback for the Rabot Plafond ENS103337 sits between 8 and 14 months depending on activity volume. The gain comes as much from time saved as from reduced MSD-related absenteeism.
Go further
Related solutions and techniques
Compare with competitors
Compare with competitors See the real differences: motor, drive, rpm, weight, dust capture, side by side on manufacturer data.
Need a quote or a demo?
Our sales team will help you choose your professional tools.
Contact us
Free quote, no obligation, reply within one working day. Equipment guaranteed 24 months.