Planing
Professional planers for walls and ceilings.
Choose the planer by thickness to remove, substrate, access and throughput; selection guidance follows below the product cards.
5 products in this category
All categories
Overhead Chipping Hammer
Chipping hammer specifically designed for overhead work at height.
Gazellomur Planer
The Gazellomur planer is the Gazellomur carrier fitted with a planing head: a semi-automatic planer that allows you to plane walls, primarily used in demolition, asbestos removal and dismantling.
Rabot Castor
The Castor is our hand-held concrete planer for heavy stripping, laitance removal, rough profile before resin or refurbishment. Brushless 1600 W motor, 14 kg, 59 dB(A), vibration 2.2 m/s², IP65. Connects to an industrial class H vacuum with suitable airflow. Swappable drum for aggressive grit. After-sales diagnosis within 48 working hours.
Ceiling Planer
The ceiling planer set has been developed with our brushless motors (low noise, low vibration, extended service life and waterproof) for renovation, construction, demolition, asbestos removal and dismantling. It handles your planing tasks on ceilings in render, resin, bituminous coatings and more. This planer can remove up to 13 mm of material in a single pass. This machine must be used with an IP65 electronic speed controller and an industrial vacuum with a LONGOPAC bag.
Écureuil
The Écureuil has been developed with our 700W brushless motors (low noise, low vibration, extended service life and waterproof) for renovation, construction, demolition, asbestos removal and coating stripping. Compact and manoeuvrable, it accesses hard-to-reach areas.
Planing levels and strips mineral surfaces, concrete or render, by removing a layer of material to true up, take off an old coating or laitance. It is aimed at renovation, decontamination and surface-preparation firms working on walls or ceilings. The choice depends on the thickness to remove, the substrate, access and the expected throughput. Our brushless planers last far longer than a brushed motor and withstand dust thanks to their IP65 rating. Paired with class H dust extraction, they capture dust at the source, an asset in asbestos or lead decontamination. Quiet and designed to reduce musculoskeletal strain, they are engineered and assembled in Roanne, France, with after-sales handled on site.
How to choose the right machine?
Which planer to level a wall or a ceiling?
The thickness to remove guides the model: a wall planer to rework a face, a ceiling planer on an Eland trolley to work without scaffolding. Substrate and access then narrow the choice of cutter.
See wall planingShould you buy or rent your planer?
For regular use, buying is the most economical over time: a long-life brushless motor, a 24-month warranty and after-sales in Roanne lower the total cost of ownership. The configurator scopes the machine by jobsite.
Open the configuratorWhich consumable for planing?
Cutters and drums are chosen by material and target aggressiveness. Sharper cutters remove faster, while finer rollers refine the finish before recoating.
See consumablesNeed a quote or a demo?
Our sales team will help you choose your professional tools.
Free quote, no obligation. Equipment guaranteed 24 months.