Ergonomics
Trolleys, gantries and ergonomic equipment.
Choose the equipment by surface worked, weight of the carried machine and workstation access; guidance follows below the cards.
11 products in this category
All categories
Crab + support
The Crab + support is a scissor lift platform support designed to sand ceilings and walls at height without strain. It attaches to the platform guardrail and carries the Fouine XB165 sander, sold separately, at the end of a sanding arm: the operator only guides the arm. The arm swings through 90° from ceiling to wall, with no dismantling and no tool change. It is not a sander but a carrier accessory, to be used with dust extraction (the IU33 Longopac vacuum is recommended).
Eland Grinding Arm
The Eland grinding arm is a ceiling grinding trolley fitted with a grinding arm module to support the Fouine XB165 grinder.
Eland Ceiling Drilling
The drilling trolley is a multi-function trolley that can be fitted with 2 different modules for ceiling drilling.
Eland Tube Lifter
The Eland tube lifter is a trolley designed to carry and raise tubes for ceiling installation using a rack-and-pinion handle.
Eland Load Balancer
The Eland load balancer is a trolley with a jib module fitted with a load balancer for wall work.
Exosquelette Scourpio
Scourpio is our passive exoskeleton for ceiling grinding and all overhead work (drilling, painting, plastering, asbestos abatement). 4.6 kg, no battery, no motor, mechanical springs. Maximum tool weight: 10 kg, adapter included. Helps with the effort of overhead work and is donned like a vest. It is not personal protective equipment. Roanne.
Gazelle
The Gazelle trolley carries the Fouine XB165 (or other compatible machine) for strain-free ceiling grinding. 36.2 kg, working height up to 4 m with the extension arm (3.5 m with the standard arm). Single-operator ceiling sanding throughput: 12 to 16 m²/h on concrete, x5 vs manual pole. Compatible with the class H IU33 Longopac vacuum. Built in Roanne.
Gazelle Perimeter
The Gazelle perimeter drilling rig is a perimeter drilling trolley designed for overhead work with precision and comfort. Fitted with a telescopic mast, a drill holder and a mounted drill, this trolley enables angled drilling up to 30 degrees on each side, facilitating perimeter and angled perforations. The trolley folds and unfolds easily, ensuring convenient transport and rapid set-up on site.
Gecko
The Gecko balancer mechanically offsets the weight of a suspended machine, notably the Petit Potam (see the tool manual for the other machines in the range), across all positions. Six load ranges from 3 to 40 kg, generous vertical and lateral travel, no battery. The operator guides the machine without bearing the load. Compatible with the Mygale gantry and Eland trolley. Roanne, after-sales diagnosis within 48 working hours.
Mygale
The Mygale gantry carries the grinder for wall work, taking the load off the operator's arms. 31 kg (gantry only, without balancer), stable H frame, adjustable height up to 2.70 m (2.80 m working height with the machine mounted), 2.60 m usable height. Compatible with Petit Potam and Desman. Roanne, after-sales diagnosis within 48 working hours.
MEWP Platform Support
The MEWP platform support is a gantry frame with a load balancer for all types of wall work, from grinding to drilling. This frame is compatible with hand machines of 15 kg at most (Petit Potam, Pic Épeiche, Desman, Bouchardeuse 150, planer, hammer drills and chippers) and can be fitted with load compensators ranging from 3 to 15 kg to minimise operator strain during extended use.
Construction ergonomics covers the equipment that carries the machine instead of the operator, carts, gantries and exoskeletons, to reduce load handling and awkward postures on grinding, drilling, bush-hammering or planing jobs. It is aimed at firms keen to reduce musculoskeletal strain and hold the pace over time. The choice depends on the surface worked, the weight of the carried machine and access to the workstation. Solutions such as the Mygale gantry or the Scourpio exoskeleton offload the effort and guide the motion, while carrying our brushless heads paired with class H dust extraction. Engineered and assembled in Roanne, France, they come with after-sales handled on site.
How to choose the right machine?
Which equipment to reduce strain?
For a wall, a gantry like the Mygale carries the grinder and removes overhead holding. For a mobile station, an exoskeleton relieves the back and shoulders. Surface and carried weight guide the choice.
See construction ergonomicsShould you buy or rent your ergonomic equipment?
For regular use, buying protects operators over the long term and steadies the pace: a 24-month warranty and after-sales in Roanne. The configurator pairs the carrier with the machine and target application.
Open the configuratorWhich head to fit on the gantry or exoskeleton?
The carrier takes the head suited to the application: grinder, bush hammer or planer depending on the task. The choice follows the surface, the material and the desired dust capture.
See the solutionsNeed a quote or a demo?
Our sales team will help you choose your professional tools.
Free quote, no obligation. Equipment guaranteed 24 months.