Bush hammer plates
Ø150 bush hammering plates for Sept Tools bush hammers: wheels for an even pitted texture, roller for continuous work.
2 models
Sept Tools offers two Ø150 mm bush hammering plates for its bush hammers: the wheel plate (ref. PE102135), which creates an even pitted texture for keying before bonding or a bush-hammered finish, and the roller plate (ref. PE102134), which works the concrete continuously for an even texture on large areas.
Wheel bush hammer plate
The wheel bush hammer plate (ref. PE102135) creates an even pitted texture on concrete, for keying before bonding or a bush-hammered finish. Ø150 mm plate, compatible with Sept Tools bush hammers.
References (1)
| Reference | Diameter |
|---|---|
| PE102135 | 150 |
Roller bush hammer plate
The roller bush hammer plate (ref. PE102134) works the concrete continuously for an even bush-hammered texture on large areas. Ø150 mm plate, compatible with Sept Tools bush hammers.
References (1)
| Reference | Diameter |
|---|---|
| PE102134 | 150 |
No models match your filters.
Choosing between wheels and roller depends on the result you need: the wheel plate gives the classic pitted bush-hammered texture (keying for mortar or resin, decorative finish), while the roller plate covers large areas faster with an even result. Both plates mount on Sept Tools bush hammers and are used with site dust extraction.
Which machines do these consumables fit?
Every reference in this family is validated for the Sept Tools brushless machines below.
Site applications
Methods, output rates and machine choice for each application covered by this family.
Complementary consumables
Families often used together on the same job site.
Frequently asked questions
Wheel or roller bush hammer plate: which one should I choose?
The wheel plate (ref. PE102135) creates an even pitted texture: choose it to key a surface before mortar or resin, or for a decorative bush-hammered finish. The roller plate (ref. PE102134) works the concrete continuously and covers large areas faster with an even texture.
Which machines do these plates fit?
Both Ø150 plates mount on Sept Tools bush hammers, including the Fouine and Potam bush hammers. Each machine is used with an IP65 electronic speed controller and a construction vacuum to capture dust at the source.
How do I order a Sept Tools bush hammer plate?
Like the whole Sept Tools catalogue, bush hammer plates are sold on quotation: request your free quote from the product card (Quote button) or the contact page, stating reference PE102135 (wheels) or PE102134 (roller). Reply within 24 working hours.
Need a quote or a demo?
Our sales team will help you choose your professional tools.
Free quote, no obligation, reply within 24h. Equipment guaranteed 24 months.