Floor, wall or ceiling: a brushless range dedicated to mechanised concrete bush hammering, for resin bonding, non-slip finish or heritage aesthetics.
Free quote, no obligation, reply within one working day. Equipment guaranteed 24 months.
Concrete bush hammering consists of creating a controlled relief on the surface of a slab, a wall or a facing, through the repeated mechanical impact of a bush hammer. This surface preparation pursues three distinct goals: increasing the bond of epoxy or polyurethane resin, producing a durable non-slip finish, or revealing the character of the concrete in heritage renovation. In every case the challenge is the same: obtaining a uniform roughness, measurable by CSP profile, without damaging the reinforcement or exhausting the operator. Sept Tools builds a range of dedicated brushless bush hammers in Roanne: the Bouchardeuse Fouine XB165 handles floors, the Bouchardeuse Potam handles vertical surfaces, and the gantry sets cover walls and ceilings with less carrying effort. The brushless motor, with no carbon brushes, is designed for the repeated impacts of bush hammering and for obtaining a uniform grain across the whole bush-hammered area.
The machines below are selected for this application: dust captured at the source and anti-MSD design. Quote within one working day.
View all our products
The Fouine bush hammer has been developed with our brushless motors (low noise, low vibration, extended service life and waterproof) for renovation, construction, demolition, asbestos removal and dismantling. It handles your bush hammering tasks on render, resin, bituminous coatings and more. This bush hammer is compatible with our range of ergonomic trolleys, enabling overhead bush hammering. This machine must be used with an electronic speed controller IP65 and an industrial vacuum with a LONGOPAC bag.
The Potam bush hammer has been developed with our brushless motors (low noise, low vibration, extended service life and waterproof) for renovation, construction, demolition, asbestos removal and dismantling. It handles your bush hammering tasks on render, resin, bituminous coatings and more. This bush hammer is compatible with various ergonomic tools from our range, enabling wall bush hammering. This machine must be used with an electronic speed controller IP65 and an industrial vacuum with a LONGOPAC bag.
The Gazellomur is a motorised tracked carrier: it supports and moves a Fouine grinding head, with no physical pulling or carrying effort. The same carrier also takes a bush-hammering or planing head. Grinding: 30 to 90 m²/h depending on the substrate (30 to 50 on plaster and adhesives, 20 to 40 on bitumen and resins). 2200 W, IP65, 124 kg. Compatible with the IU33 Longopac, a Sept Tools vacuum declared as class H. Built and assembled in France.
The Mygale gantry carries the grinder for wall work, taking the load off the operator's arms. 31 kg (gantry only, without balancer), stable H frame, adjustable height up to 2.70 m (2.80 m working height with the machine mounted), 2.60 m usable height. Compatible with Petit Potam and Desman. Roanne, after-sales diagnosis within 48 working hours.
The Gazelle trolley carries the Fouine XB165 (or other compatible machine) for strain-free ceiling grinding. 36.2 kg, working height up to 3.5 m (4 m with the extension arm). Single-operator ceiling sanding throughput: 12 to 16 m²/h on concrete, x5 vs manual pole. Compatible with the class H IU33 Longopac vacuum. Built in Roanne.
The Eland grinding arm is a ceiling grinding trolley fitted with a grinding arm module to support the Fouine XB165 grinder.
The IU33 Longopac is our class H construction vacuum for HEPA H14 source capture. 1100 W, 25 kg, 200 m³/h flow. Longopac continuous bagging system: the full bag is sealed and separated without exposing the operator to the collected dust. Compatible with all our machines except the Castor and Ceiling Planer planers. Source capture of crystalline silica. EN 60335-2-69 annex AA. Roanne, after-sales diagnosis within 48 working hours.
Floor, wall and ceiling: a brushless range for each jobsite.
Occupied site with a suitable sound level.
Target profile before industrial epoxy.
Motor only: 20,000 h against 1,500 h for a carbon-brush motor.
Consistent grain guaranteed across the whole surface.
Floor, wall, ceiling: a dedicated brushless solution for each jobsite.
Gantries, combos and trolleys: reduced carrying effort, a day with less strain.
IU33 Longopac connected.
On floors, the Bouchardeuse Fouine XB165. On walls, the Mygale + Petit Potam set covers standard jobsites, and the Gazellomur Bouchardage reaches 42-63 m²/h. On ceilings, the Gazelle or Eland sets with Fouine bring the strain reduction needed for prolonged overhead work.
Manufacturers of industrial epoxy resins and technical paints require a precise surface profile, stated in their technical data sheet. Mechanised bush hammering prepares the substrate: the profile to reach is the one given in the coating's technical data sheet. It is the reference preparation before any high-performance coating.
In heritage renovation, bush hammering reveals the aggregates and imitates traditional stone dressing. In contemporary architecture, it produces a natural stone effect on concrete facades. In decorative concrete, it serves as a rough base before gloss polishing. Three aesthetic uses, one requirement for consistency.
The brushless motor, with no carbon brushes, is designed for the repeated impacts of bush hammering. Coupled with built-in strain reduction (Mygale gantry, native Gazellomur, Gazelle ceiling trolley), the operator keeps the pace over a full day with less strain.
civil engineering · reinforced concrete
Bush hammers: watch all our jobsite videosEpoxy resin bonding, non-slip finish, tactile paving strips. Fouine XB165 + dedicated guard.
See the page 42-63 m²/hArchitectural facade finish, vertical resin bonding, accessibility. Mygale or Gazellomur set.
See the page Anti-MSDBush hammering without strain on ceilings and soffits. Gazelle or Eland sets with Fouine.
See the pageOur sales team will help you choose your professional tools.
Free quote, no obligation. Equipment guaranteed 24 months.
