A concrete bush hammer designed for the real jobsite: opening the skin of the concrete, creating a reliable resin bond and a durable non-slip finish. Brushless, quiet electric bush hammer, made in Roanne by Sept Tools.
Free quote, no obligation, reply within one working day. Equipment guaranteed 24 months.
The Sept Tools electric concrete bush hammer meets a precise need in second-fix work: preparing a surface before epoxy resin, creating a uniform roughness profile and obtaining a durable non-slip floor. Mechanical concrete bush hammering replaces chemical stripping and the rock grinder: it opens the pores of the substrate, removes laitance and promotes the bond of the coating. Our electric bush hammer relies on two machines, the Bouchardeuse Fouine XB165 and the Bouchardeuse Potam, both fitted with a brushless motor (20,000 h, 59 dB(A), IP65; declared vibration of 1.2 to 2.2 m/s² in bush hammering, manual values). The Sept Tools electric bush hammer works on floors, walls and ceilings, with less strain, on raw concrete, screed and render. By quote, French manufacturing, after-sales included.
The machines below are selected for this application: dust captured at the source and anti-MSD design. Quote within one working day.
View all our products
The Fouine XB165 is our versatile wall and ceiling grinder, designed for renovation, construction, demolition, asbestos abatement and dismantling. Brushless 1600 W motor, 0.35 m/s² vibration, 60 dB(A), IP65. Mounted on a Gazelle or Eland trolley, it grinds concrete ceilings without holding the machine overhead. Ø165 disc for grinding. Designed in Roanne, after-sales diagnosis within 48 working hours.
The Petit Potam XM165 is our compact concrete wall grinder for surface preparation, paint removal, raw concrete grinding, plaster, adhesives and resins. Brushless 1600 W motor, vibration of 0.35 m/s² measured at the handle and declared in the user manual, 59 dB(A) on occupied job sites. Compatible with our Mygale gantries and Gecko balancers for ergonomic work on large surfaces. IP65 sealing, x13 motor lifespan vs brushed designs (motor only). Built and assembled in France.
The Pic Épeiche is our portable diamond core drill for concrete and reinforced-concrete wall drilling, perimeter drilling, chemical anchoring. 1600 W motor, 5.9 kg, 61 dB(A), vibration 0.35 m/s², IP65. Water-fed diamond drill: never run it without a water supply. Slurry recovered with the water collector or the Sept Tools RU80/100 wet vacuum (recommended). After-sales diagnosis within 48 working hours.
The same motor on the Fouine XB165 and Petit Potam, made in Roanne.
Floor slab preparation on raw concrete, depending on the bush hammering depth.
Operator comfort and margin against exposure limit values.
Fouine XB165 and Petit Potam bush hammers: concrete bush hammering possible without evacuating neighbouring zones.
The wheels bush hammer the surface uniformly, which creates a repeatable roughness profile. Epoxy or polyurethane resin bonds mechanically, with no risk of blistering caused by residual laitance.
Fouine XB165 on a trolley for floors and ceilings, compact hand-held Petit Potam for walls and restricted access. A single family of concrete bush hammers for every plane of the jobsite.
The electric bush hammer pairs with Sept Tools extraction to capture bush hammering dust. Clean jobsite, silica captured at the source, real-time visibility of the profile obtained.
Design, assembly and after-sales in Roanne. Brushless motor with no consumable, no dependence on an import chain to keep the concrete bush hammer in service.
Assessment of the slab, the laitance and the bush hammering depth required according to the intended coating (epoxy, polyurethane, self-levelling or non-slip).
Fouine XB165 for floors and ceilings on a trolley, Petit Potam for walls and restricted access. Configuration suited to the surface and the accessibility.
Even passes of the electric bush hammer coupled with extraction: opening the skin of the concrete and capturing the dust, clean jobsite and profile visible in real time.
Checking the roughness obtained and the removal of laitance, before applying the resin or the non-slip finish.
Laying the resin or accepting the non-slip finish on a mechanically prepared substrate, with no chemical stripping product and with traceability of the result.
Substrate diagnosis
Assessment of the slab, the laitance and the bush hammering depth required according to the intended coating (epoxy, polyurethane, self-levelling or non-slip).
Choice of bush hammer
Fouine XB165 for floors and ceilings on a trolley, Petit Potam for walls and restricted access. Configuration suited to the surface and the accessibility.
Bush hammering with extraction
Even passes of the electric bush hammer coupled with extraction: opening the skin of the concrete and capturing the dust, clean jobsite and profile visible in real time.
Profile check
Checking the roughness obtained and the removal of laitance, before applying the resin or the non-slip finish.
Applying the coating
Laying the resin or accepting the non-slip finish on a mechanically prepared substrate, with no chemical stripping product and with traceability of the result.
Epoxy resin laid on glazed concrete or concrete covered in laitance peels off or blisters: the mechanical bond was not created, the grinding smoothed instead of opening.
The concrete bush hammer opens the skin of the substrate and removes laitance. The roughness profile durably anchors the resin. The Fouine XB165 on a trolley prepares the slab at 10 to 16 m²/h on raw concrete.
A pneumatic bush hammer or a jackhammer saturates the noise and forces neighbouring zones to be evacuated, which blocks the schedule in tertiary buildings or inhabited housing.
The Sept Tools electric bush hammer works at 59 dB(A). Bush hammering is done without evacuating adjacent premises, the schedule holds, the site stays usable around it.
Bush hammering a soffit or a ceiling at arm's length exhausts the operator in a few hours and generates chronic musculoskeletal disorders.
The Bouchardeuse Fouine XB165 mounted on a trolley reduces carrying effort: the operator guides the bush hammer, carries it less. Vibration declared at 1.2 m/s² (Bouchardeuse Fouine XB165 manual).
A non-slip finish created by manual sandblasting or with an angle grinder is irregular and difficult to justify against slip requirements at handover.
Concrete bush hammering creates a controlled, uniform roughness. The non-slip finish is regular, repeatable and documentable, which secures the handover on docks, ramps and wet areas.
Carbon-brush bush hammers wear quickly under the continuous effort of bush hammering and break down at the worst moment, immobilising the workstation.
The brushless motor (20,000 h, x13 service life) removes the carbon brushes. The electric bush hammer withstands intensive campaigns without interruption or motor consumable.
Slab preparation before epoxy or self-levelling resin: the concrete bush hammer opens the pores, removes laitance and guarantees the mechanical anchoring of the coating. Fouine XB165 on a trolley for large areas, realistic output rates of 10 to 16 m²/h on floors on raw concrete depending on the depth sought.
Creation of a non-slip finish on ramps, loading docks, collective kitchens, car parks. Concrete bush hammering structures the surface uniformly and durably, without adding any product. The electric bush hammer gives a uniform result that manual sandblasting does not.
Architectural finish on cast-in-place concrete, low walls, facades: the Petit Potam reveals the aggregates for a worked mineral look. Controlled vertical work, without excessive vibration or loss of motor speed.
Bush hammering of soffits and ceilings before bonding a covering or a facade renovation: the Fouine XB165 mounted on a trolley removes the load at arm's length. The operator guides the bush hammer, no longer carries it, which cancels the strain of overhead bush hammering.
Our sales team will help you choose your professional tools.
Free quote, no obligation. Equipment guaranteed 24 months.
