renovation · concrete
Grinding
Gazellomur Grinding brushless 60 dB, 0.35 m/s², IP65
Registered designThe Gazellomur (grinding configuration) is our brushless 3-in-1 combo on gantry: grinding, bush hammering and planing with one machine. In grinding: 60 to 90 m²/h on concrete, 30 to 50 on plaster and adhesives, 20 to 40 on bitumen and resins. 1600 W constant torque, IP65, native ergonomics (the gantry carries the machine, the operator guides). Compatible with Sept Tools class H vacuums. Built and assembled in France.
Ref. ST-GZM
Free quote, no obligation, reply within one working day. Equipment guaranteed 24 months.
Worldwide Delivery
24-month warranty
After-sales within one working day
Datasheet
Technical specifications
- Power
- 1,600 W
- Weight
- 124 kg
- Voltage
- 220 V
- Rotation speed
- 4,800 rpm
- IP rating
- IP65
- Noise level
- 60 dB
- Vibrations
- 0.35 m/s²
Field evidence
Forearm vibration measured 56% lower (Distrimo study, Bouygues Construction) and 0.02 f/ml of airborne fibres measured by a UKAS laboratory on an NHS hospital site.
See our case studiesProtected technology
The design used here is covered by registered industrial protection. Original parts are produced to controlled dimensions and stay available over time.
Compatibility
Which machines mount on this carrier?
One carrier, several machines: the compatibility list below comes from the 2025 catalogue.
Compatible machines
Other configurations
Compatible consumables
Real-world conditions
On client sites, no retakes
Footage shot on customer projects: floor, wall, ceiling sanding, SS3 asbestos work. No staging.
civil engineering · raw concrete
facade maintenance · paint on concrete
planing · concrete
decontamination · concrete wall
wall stripping · concrete
wall planing · concrete
Video
What does the demo show?
On video: Gazellomur in real job-site conditions, setup, work rate and dust captured at the source.
Related solutions
See our solutions by job site
How to reduce noise on a construction site? Silent site machines
Grinders and hammer drills often exceed 90 dB(A). Sept Tools brushless machines sit around 60 dB(A) at the operator position, a benchmark measured on reference machines. Enough to work on occupied sites, hospitals or schools, without complaints or restricted hours.
DiscoverThe concrete wall grinder built to last
Wall grinder, long-reach grinder, concrete wall grinder: whatever you call it on site. The Sept Tools wall grinder is compact, made in Roanne and built for intensive renovation work.
DiscoverConstruction Exoskeleton for Overhead Work: the Scourpio
A passive exoskeleton built for the jobsite: it transfers the weight of the raised arm and the tool to the belt, with no battery and no motor. Overhead grinding, drilling, painting, plastering.
Discover See also
Full range
Similar products
Fouine XB165
The Fouine XB165 is our versatile wall and ceiling grinder, designed for renovation, construction, demolition, asbestos abatement and dismantling. Brushless 1600 W constant-torque motor, 0.35 m/s² vibration, 60 dB(A), IP65. Mounted on a Gazelle Premium or Eland trolley, it grinds concrete ceilings without holding the machine overhead. Ø165 disc for grinding, swappable bush-hammering drum in under 2 minutes. Designed in Roanne, parts in stock, national 48h after-sales.
Petit Potam
The Petit Potam XM165 is our compact concrete wall grinder for surface preparation, paint removal, raw concrete grinding, plaster, adhesives and resins. Brushless 1600 W constant-torque motor, vibration measured at 0.35 m/s² (14 times below the 5 m/s² ELV threshold), 60 dB on occupied job sites. Compatible with our Mygale gantries, Gecko balancers and Eland trolleys for ergonomic work on large surfaces. IP65 sealing, x13 motor lifespan vs brushed designs. Built and assembled in France.
Tapir
The Tapir XTT330 is our professional concrete floor grinder for screed preparation, industrial surfacing and polished concrete finishing. Brushless 1600 W constant-torque motor, 49 kg, 60 dB, vibration 0.27 m/s², IP65. Throughput 19 to 26 m²/h on concrete depending on hardness. Compatible with our class H vacuums IU33 Longopac, IU40, IU51, IU81 for crystalline silica OEL compliance. No sparking, no overheating, x13 motor lifespan vs brushed designs. Parts in stock in Roanne, 48h after-sales.
Articles and guides
Anti-fatigue on construction sites: what does inaction cost?
Hidden cost of MSDs in construction, regulatory framework, ROI calculation and Sept Tools anti-fatigue solutions backed by real-world figures.
Read article
Concrete surface preparation: complete guide for professionals
Methods, tools and best practices to prepare a concrete surface before treatment: grinding, shot blasting, scarifying, bush hammering and consumable selection.
Read article
Decorative concrete: grinding and professional finishes (polished, satin, raw)
Decorative concrete: grinding and professional finishes (polished, satin, raw). Technical guide to Mygale tools for architects and contractors.
Read articleComparison
See the comparisonHow this machine compares to the competition
We put our machines head to head with the market references, criterion by criterion, on verified manufacturer data.
Frequently asked questions
Which consumables does this grinder use?
It takes the Ø165 diamond cup wheels with a daisy bore (also compatible with a 22.2 bore), plus the velcro and ceramic pads in the range. The wheel to choose depends on the material to grind (concrete, render, resin, epoxy) and how aggressive you need it.
How do you maintain a brushless grinder day to day?
The brushless motor has no carbon brushes to replace, so maintenance stays light. Clean the housing and the extraction port after each shift and check the wheel is properly fitted.
Does the grinder capture dust at the source?
Yes, it is built for capture at source and pairs with a class H vacuum for silica or asbestos dust. Source capture keeps the jobsite cleaner and protects the operator.
What is the delivery lead time for Gazellomur?
We confirm the dispatch lead time with your quote within 24 business hours: it depends on the model and workshop availability. Common spare parts and consumables are kept in stock in Roanne so your jobsite is not held up.
Why is the price on request?
Because a machine alone is not a workstation: the price depends on the configuration, the trolley or gantry, the extraction unit and the consumables matched to your substrate. A headline price would have you compare setups that are not comparable. Our machines do cost more to buy than an entry-level brushed machine, and we own that: the maths works over service life, not over the ticket. You are free to ask for a quote just to compare, with no sales follow-up if you do not take it further.
What warranty and after-sales come with Gazellomur?
The whole range carries a 24-month warranty, parts and labour. After-sales is handled in our Roanne workshop, with spare parts in stock and a reply within 24 business hours, no call centre.
Need a quote or a demo?
Our sales team will help you choose your professional tools.
Contact us
Free quote, no obligation. Equipment guaranteed 24 months.