Gazellomur Bush Hammer Bush hammering brushless 60 dB, 0.35 m/s², IP65
Registered designThe GAZELLOMUR BUSH HAMMER is a semi-automatic bush hammer that allows you to treat walls without any effort, primarily used in demolition, asbestos removal and dismantling. Its brushless motor delivers a machine with low noise, low vibration and an extended service life, while being waterproof (IP65). The central mast folds and unfolds without dismantling to facilitate transport and accessibility. This machine must be used with a
Ref. ST-GB
Free quote, no obligation, reply within one working day. Equipment guaranteed 24 months.
Worldwide Delivery
24-month warranty
After-sales quote within 1 to 2 working days
Technical specifications
- Power
- 1,600 W
- Weight
- 130 kg
- Voltage
- 220 V
- Rotation speed
- 4,800 rpm
- IP rating
- IP65
- Noise level
- 60 dB
- Vibrations
- 0.35 m/s²
Measured across the range: forearm vibration 56% lower in drilling and chiselling assisted by an offset arm and a balancer (Distrimo study), and 0.02 f/ml of fibres measured by a UKAS laboratory with the Fouine XB165 and the IU33 vacuum on an NHS hospital site, 5 times below the UK control limit (0.1 f/ml).
See our case studiesThe design used here is covered by registered industrial protection. Original parts are produced to controlled dimensions and stay available over time.
What does this machine work with?
Compatibility as listed in the 2025 catalogue: ergonomic carriers, configurations and required dust extraction. Each link opens the full product page.
Other configurations
What does the demo show?
On video: Gazellomur Bush Hammer in real job-site conditions, setup, work rate and dust captured at the source.
Similar products
Fouine Bush Hammer
The FOUINE BUSH HAMMER has been developed with our brushless motors (low noise, low vibration, extended service life and waterproof) for renovation, construction, demolition, asbestos removal and dismantling. It handles your bush hammering tasks on render, resin, bituminous coatings and more. This bush hammer is compatible with our range of ergonomic trolleys, enabling overhead bush hammering without effort. This machine must be used with an electronic speed controller
Potam Bush Hammer
The POTAM BUSH HAMMER has been developed with our brushless motors (low noise, low vibration, extended service life and waterproof) for renovation, construction, demolition, asbestos removal and dismantling. It handles your bush hammering tasks on render, resin, bituminous coatings and more. This bush hammer is compatible with various ergonomic tools from our range, enabling wall bush hammering without effort. This machine must be used with an electronic speed controller
What is a bush hammer used for on concrete?
It treats the concrete surface to create a key (before resin, render or levelling) or to expose the aggregate. The work is done by percussion of pin rollers, replaced as they wear.
Does bush hammering create dust?
The machine is designed for capture at source; paired with a class H vacuum, it cuts concrete and silica dust during surface treatment.
How do you maintain the bush hammer?
The brushless motor has no brushes to replace; check the roller wear and clean the extraction port after each shift.
What is the delivery lead time for Gazellomur Bush Hammer?
We confirm the dispatch lead time with your quote within 24 business hours: it depends on the model and workshop availability. Common spare parts and consumables are kept in stock in Roanne so your jobsite is not held up.
Why is the price on request?
Because a machine alone is not a workstation: the price depends on the configuration, the trolley or gantry, the extraction unit and the consumables matched to your substrate. A headline price would have you compare setups that are not comparable. Our machines do cost more to buy than an entry-level brushed machine, and we own that: the maths works over service life, not over the ticket. You are free to ask for a quote just to compare, with no sales follow-up if you do not take it further.
What warranty and after-sales come with Gazellomur Bush Hammer?
The whole range carries a 24-month warranty, parts and labour. After-sales is handled in our Roanne workshop, with spare parts in stock and a reply within 24 business hours, no call centre.
Need a quote or a demo?
Our sales team will help you choose your professional tools.
Free quote, no obligation. Equipment guaranteed 24 months.