Diamond Drill Bits for Drilling
5 models across 44 references, O4 to O35mm, solid bits and short crowns, for drilling concrete, reinforced concrete and stoneware.
5 models
Sept Tools' diamond drill bit range covers 5 models across 44 references, spanning diameters from O4 to O35mm. It drills concrete, reinforced concrete, porcelain stoneware and pilot holes for chemical anchors. The range includes solid bits and short crowns, with ring-segment or crushed-diamond cutting edges depending on the reference and the required drilling speed. Diamond drill bits work with all DUSS machines in the Sept Tools catalogue, matched by shank type to each drill model, covering site drilling from small anchor holes to larger diameters.
Ring-segment diamond drill bit, automatic shank
The Ring-segment diamond drill bit, automatic shank is a diamond drill bit for drilling concrete, reinforced concrete and porcelain stoneware. Depending on the reference, it is supplied as a solid bit (P) or a core bit (C), is available from Ø4 to Ø35 mm and comes in lengths from 85 to 130 mm.
References (20)
| Reference | Diameter | Length |
|---|---|---|
| FF-4-85-16 | 4 | 85 mm |
| FF-5-95-16 | 5 | 95 mm |
| FF-1/4-95-16 (P) | 4 | 95 mm |
| FF-7-95-16 (C) | 7 | 95 mm |
| FF-8-95-16 (P) | 8 | 95 mm |
| FF-8-95-16 (C) | 8 | 95 mm |
| FF-12-105-16 (P) | 12 | 105 mm |
| FF-14-105-16 (P) | 14 | 105 mm |
| FF-6-95-16 | 6 | 95 mm |
| FF-7-95-16 | 7 | 95 mm |
| FF-8-95-16 | 8 | 95 mm |
| FF-10-105-16 | 10 | 105 mm |
| FF-12-130-16 | 12 | 130 mm |
| FF-14-130-16 | 14 | 130 mm |
| FF-16-130-16 | 16 | 130 mm |
| FF-18-130-16 | 18 | 130 mm |
| FF-20-130-16 | 20 | 130 mm |
| FF-25-130-16 | 25 | 130 mm |
| FF-32-130-16 | 32 | 130 mm |
| FF-35-130-16 | 35 | 130 mm |
Crushed-diamond drill bit (FSA)
The Crushed-diamond drill bit (FSA) is a diamond drill bit for precision drilling. It is available from Ø6 to Ø15 mm.
References (6)
| Reference | Diameter |
|---|---|
| FSA-6 | 6 |
| FSA-8 | 8 |
| FSA-10 | 10 |
| FSA-12 | 12 |
| FSA-14 | 14 |
| FSA-15 | 15 |
Drill bit for chemical anchors
The Drill bit for chemical anchors is a diamond drill bit for drilling for chemical anchors. It is available from Ø10 to Ø35 mm (plus 1/4", 8" and 10" diameters) and comes in lengths from 95 to 315 mm.
References (11)
| Reference | Diameter | Length |
|---|---|---|
| FF-10-125-16 | 10 | 125 mm |
| FF-12-135-16 | 12 | 135 mm |
| FF-14-155-16 | 14 | 155 mm |
| FF-18-170-16 | 18 | 170 mm |
| FF-24-215-16 | 24 | 215 mm |
| FF-28-255-16 | 28 | 255 mm |
| FF-30-285-16 | 30 | 285 mm |
| FF-35-315-16 | 35 | 315 mm |
| FF-1/4-95-16 | 1/4" | 95 mm |
| FF-3/8-95-16 | 8" | 95 mm |
| FF-1/2-130-16 | 10" | 130 mm |
Centering drill bit 1/20
The Centering drill bit 1/20 is a diamond drill bit for precision drilling. It is available from Ø8 to Ø10 mm and comes in lengths from 120 to 300 mm.
References (3)
| Reference | Diameter | Length |
|---|---|---|
| FC8-120-17 | 8 | 120 mm |
| FC10-220-17 | 10 | 220 mm |
| FC10-300-17 | 10 | 300 mm |
Tool holder for diamond drill bits
The Tool holder for diamond drill bits is an accessory that holds and drives diamond drill bits on the machine. It is available with several shank options: cylindrical output Ø13, 1/2 gas or hex, SDS, M16, 5/8, M16, 5/8 UNC female to 1/2 gas male.
References (4)
| Reference | Shank |
|---|---|
| AD-6-17 | SORTIE CYLINDRIQUE Ø13 - 1/2 G ou 6 PANS |
| AD-7-17 | SDS - M16 |
| AD-5/8-M16 | 5/8 - M16 |
| AD-5/8-1/2 | 5/8 UNC FEMELLE - 1/2 GAZ MALE |
No models match your filters.
Solid diamond bits suit small precision holes and chemical-anchor pilot holes, while short crown bits with ring segments or crushed-diamond edges remove material faster on larger diameters up to O35mm. Ring-segment edges cut cleanly through reinforced sections, while crushed-diamond edges give a more aggressive, faster cut on plain concrete or stoneware. Shank compatibility with DUSS machines determines which bit reference fits which drill; adapters extend the range where a different shank or thread is required.
Which machines do these consumables fit?
Every reference in this family is validated for the Sept Tools brushless machines below.
Drilling and chiselling: watch these machines on real job sites
Site applications
Methods, output rates and machine choice for each application covered by this family.
Complementary consumables
Families often used together on the same job site.
Frequently asked questions
Which diamond drill bit suits chemical anchor holes?
Solid diamond drill bits in the smaller diameters of the O4 to O35mm range are suited to chemical anchor pilot holes in concrete and reinforced concrete. Sept Tools offers 44 references across 5 models to match anchor diameter and depth requirements.
Do diamond drill bits work on porcelain stoneware?
Yes. The diamond drill bit range covers concrete, reinforced concrete and porcelain stoneware, using solid bits or short crowns with ring-segment or crushed-diamond edges depending on the material hardness and the finish required around the hole.
Which drills do diamond drill bits fit?
Diamond drill bits work with all DUSS machines in the Sept Tools catalogue. Shank type varies by reference, so match the bit's shank to the DUSS drill model in use, using a drilling adapter if the shank or thread does not line up directly.
How do I order diamond drill bits since Sept Tools does not publish prices?
Indicate the diameter (O4 to O35mm), material to drill and the DUSS drill model in use, then request a free quote. Sept Tools replies with pricing and availability within 24 hours.
Need a quote or a demo?
Our sales team will help you choose your professional tools.
Free quote, no obligation, reply within one working day. Equipment guaranteed 24 months.